LIS331DLHTR electronic integrated circuit MEMS digital output motion sensor

LIS331DLH

MEMS digital output motion sensor

ultra low-power high performance 3-axes “nano” accelerometer

Features

■ Wide supply voltage, 2.16 V to 3.6 V

■ Low voltage compatible IOs, 1.8 V

■ Ultra low-power mode consumption down to 10 µA

■ ±2g/±4g/±8g dynamically selectable full-scale

■ I 2C/SPI digital output interface

■ 16 bit data output

■ 2 independent programmable interrupt generators for free-fall and motion detection

■ Sleep to wake-up function

■ 6D orientation detection

■ Embedded self-test

■ 10000 g high shock survivability

■ ECOPACK® RoHS and “Green” compliant

Applications

■ Motion activated functions

■ Free-fall detection

■ Intelligent power saving for handheld devices

■ Pedometer

■ Display orientation

■ Gaming and virtual reality input devices

■ Impact recognition and logging

■ Vibration monitoring and compensation

Description

The LIS331DLH is an ultra low-power high performance three axes linear accelerometer belonging to the “nano” family, with digital I²C/SPI serial interface standard output.

The device features ultra low-power operational modes that allow advanced power saving and smart sleep to wake-up functions.

The LIS331DLH has dynamically user selectable full scales of ±2g/±4g/±8g and it is capable of measuring accelerations with output data rates from 0.5 Hz to 1 kHz.

The self-test capability allows the user to check the functioning of the sensor in the final application.

The device may be configured to generate interrupt signal by inertial wake-up/free-fall events as well as by the position of the device itself. Thresholds and timing of interrupt generators are programmable by the end user on the fly.

The LIS331DLH is available in small thin plastic land grid array package (LGA) and it is guaranteed to operate over an extended temperature range from -40 °C to +85 °C.

Absolute maximum ratings

Stresses above those listed as “absolute maximum ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device under these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.

Note: Supply voltage on any pin should never exceed 6.0 V

Stock Offer (Hot Sell)

electronic integrated circuit

linear integrated circuits

LIS331DLHTR electronic integrated circuit MEMS digital output motion sensor Images